Autopilot CUMULUS S50 Digital CO2 Controller

The Autopilot Cumulus S50 Digital CO2 Controller measures and controls grow room carbon dioxide levels with great precision. It can operate in Fuzzy Logic mode, ppm Up or ppm Down mode. The S50 digital display shows exact ppm readings down to 1 ppm resolution. It boasts a fully customizable CO2 set point and deadband, min/max recall, LED mode and error indicators, optional calibration and a remote 15' low drift CO2 sensor with photocell. 

The ppm Up mode is designed for use with CO2 generator systems (LP or NG).

Fuzzy Logic is designed specifically for controlling standard compressed CO2 tank & regulator systems to improve efficiency and minimize CO2 waste. When in Fuzzy Logic mode, the built-in microprocessor continuously applies calculations to the injection schedule, improving CO2 injection rates over time. This highly efficient method of injection helps maintain more consistent CO2 levels while saving money year round on expensive CO2 tanks.
 
Controlling CO2 has never been easier or more affordable. Autopilot's CUMULUS S50 eliminates guesswork while maintaining grow room carbon dioxide levels with great accuracy and efficiency. 

Mounts to both walls and grow tents. Two mounting kits are included with each controller.Accurate dual-beam CO2 sensor

  • Accurate dual-beam CO2 sensor
  • Adjustable CO2 deadband
  • 15' remote combination probe (CO2 & light)
  • Instantaneous readings down to 1 ppm
  • Records high and low CO2 levels
  • Fuzzy Logic mode adjustable (on/off)
  • LED mode and error indicators
  • ETL-listed
  • 14.5 max operating amperage, 120V

 

learn more

 

 

CO2 Generators

 

 

Three sizes available—4-burner, 8-burner, and 10-burner (adjustable: 2, 5, 7, or 10-burner option)

4-Burner: Spaces 14' x 14' and smaller
8-Burner: Spaces 28' x 28' and smaller
10-Burner: Spaces 35' x 35' and smaller

 

All models are equipped with:

  • Precision manufactured brass burners
  • Solid-state electronic ignition module—no pilot light necessary
  • TIP OVER switch shuts off gas source if the unit falls or tips over
  • SHUT DOWN warning with LED error indicator lights
  • Powder coated steel
  • BTU output ratings

 

 

View all Autopilot CO2 generators

CO2 Monitor & Controller w/15' Remote Sensor

Autopilot APC8200 CO2 Monitor & Controller with Memory offers a simple and affordable way to control, monitor and record CO2 levels over an adjustable period of time. Trace your room's CO2 levels over minutes, hours, or up to 7 days with this easy-to-use controller. The APC8200 also boasts a fully customizable CO2 setpoint and deadband. Adjust and review your CO2 levels when you want to and how you want to. The APC8200's memory feature gives growers a real edge in fine-tuning the grow room environment. Optimize your CO2 levels with this precision controller from Autopilot!

  • Fully customizable ppm deadband and CO2 setpoint allow flexibility in programming
  • Trend Chart records CO2 levels per minute, hour, day and week for accurate analysis of CO2 distribution
  • Adjustable Trend Chart Zoom levels let you trace your ppm levels
  • Remote CO2 sensor probe w/photocell & 15' data cable lets you take readings from proper grow room locations
  • 2-Channel Low Drift NDIR Sensor precisely reads CO2 ppm levels
  • Green LED identification lights inform you of the unit's status at all times

Specifications

9"H x 7"W x 4"D, 15A max/120v

 

learn more

 

Autopilot Desktop CO2 Monitor with Memory and Data Storage

Records and Exports 1 Year of Environmental Data!

Developed to detect the presence of CO2 and to monitor temperature & relative humidity in ambient air, this device is smart, compact and easy to use. Its high quality LCD display boasts a green back-lit screen for easy nighttime viewing, and it features independent CO2, RH and temperature readings. In addition, the APCEMDL comes equipped with a built-in microSD card port that automatically records all environmental data to an included microSD card. Assess and improve your grow room climate with Autopilot’s precision monitor with exportable memory

 

  • Records and Exports 1 Year of Environmental Data!
  • Measures & records CO2 levels, room temperature, and relative humidity
  • Continuously records data to the included microSD card every 5 seconds
  • Exported data is converted to Microsoft Excel file format for easy review
  • Micro USB power socket, Micro USB-to-USB power cord, and USB power adapter
  • Max and Min readings of CO2, Temp and RH are shown on screen at each Zoom Level
  • Units screen displays 17 sets of data at each Zoom Level: 1 minute, 1 hour, 24 hours and 7 days

 

 

 

learn more

 

Autopilot Desktop CO2 Monitor & Data Logger

Accuracy, innovative features, and unbeatable affordability in one small, user-friendly CO2 monitor. To deliver its measurements, the Autopilot APCEM2 Desktop CO2 Monitor features a clear display system that boasts a digital memory chart of recorded CO2, relative humidity, and temperature readings over an adjustable 24-hour or 7-day period. With the industry-new feature Trend Chart, the device is able to trace the above quantities through past minutes, hours, or up to 7 days. 

The Autopilot APCEM2 Desktop CO2 Monitor is patent pending, featuring a hook-and-loop fastener along the back that can securely affix a rectangular external battery pack. By maximizing mobility, the device can be easily moved to any room—living room, kitchen, office—to monitor IAQ virtually anywhere. The Autopilot APCEM2 Desktop CO2 Monitor can be powered by almost any standard USB port that provides power, such as a laptop, a wall adapter, or an external mobile battery pack (PowerBank). Battery pack not included.

 

  • CO2/RH/Temperature monitor on a clear display 
  • Trend Chart: shows variable Min/Hr/Day/Wk for readings of CO2/RH/Temperature 
  • 2-Channel Low Drift NDIR (non-dispersive infrared) Gas Sensor 
  • Audible alarm for low/high CO2 levels 
  • Alarm function for environmental extremes
  • 3 Multicolored LEDs for Easy Reading 
  • Built-in directory of common plant types of their general CO2 requirements; two slots for custom plant inputs 
  • Replenish CO2 Reminder: calculates time frame based on usage from past 5 days 
  • "Green" Power Supply that is compatible with a standard smartphone charger
  • View charts as weekly, daily, hourly, or per minute
  • Additional settings measure air quality for breathing
  • PPM settings for tomatoes, cucumbers, and more
  • Multiple options for hanging, mounting or desktop display
  • Comes with two Micro USB Cables for power
  • USB AC adapter

 

 

learn more

 

Autopilot PPM-5 CO2 Controller
The Autopilot PPM-5 CO2 Controller is a simple and affordable way to control your CO2 injection device. Choose your desired CO2 parts per million (PPM) level, and the controller will automatically maintain that specified CO2 level. A built-in photocell located on the right side of the sensor automatically deactivates CO2 injection during the night time, and the unit's digital display shows live CO2 levels. The display is green in color, which will not disturb photoperiod. A remote sensor with detachable 16' cable allows close placement to the plant canopy.
 
  • Monitor & Control CO2 levels
  • Photocell deactivates CO2 device during night cycle
  • Digital display shows current CO2 levels 24/7
  • Detachable 16 ft sensor cable

Specifications

6"H x 3"W x 4"D, 15A max/120v

 
Discontinued

 

Analog CO2 Controller
The Analog CO2 Controller (APCECO) offers indoor gardeners an economical and simple method of monitoring and controlling CO2 within your grow area. The simplicity and value of this unit are attractive to both the beginning hobbyist and the professional grower. The APCECO utilizes a highly visible and intuitive LED indicator display to let you know generalized CO2 levels. The LED indicator blinks to show the PPM level in increments of 100. The 15' remote sensor allows versatile placement within the grow area.

Specifications

6"H x 3"W x 4"D, 15A max/120v
 
Discontinued

Digital CO2 Controller – Fuzzy Logic

Autopilot's easy-to-use, highly accurate Digital CO2 Controller (APCECOD) measures the carbon dioxide level in the grow room and automatically turns off the CO2 device to accurately keep the carbon dioxide PPM at the desired level. Autopilot's product operates in Fuzzy Logic mode or standard logic mode (for use with generators). Fuzzy Logic mode calculates the overshoot and undershoot of CO2 injection in the room. In Fuzzy Logic mode, the built-in microprocessor applies the calculations to the injection schedule, eliminating guesswork and maintaining efficient CO2 levels. Standard logic CO2 controllers don't perform these calculations; instead, they continue to inject CO2 into the room until the controller reaches its set point. Standard CO2 injection methods do not allow enough time for the carbon dioxide to mix with the air. They are an option when paired with a CO2 generator but are costly and inefficient for use with bottled CO2 tanks.

The Autopilot Digital CO2 controller has a 15' remote CO2 sensor with built-in photocell. Controlling CO2 has never been easier or more affordable. Autopilot’s digital CO2 controller eliminates guesswork while it controls your carbon dioxide level with accuracy and efficiency.

  • 15' remote combination probe, CO2, and light
  • Accurate dual beam CO2 sensor
  • Adjustable CO2 Dead-Band
  • Fuzzy Logic mode adjustable (on/off)
  • Built-in data logger stores high and low readings for CO2 PPM

Specifications

9"H x 7"W x 4"D, 15A max/120v

 

Discontinued